This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Carolina GSE is a global supplier, distributor, repair facility, and service center of aircraft ground support equipment (GSE). We offer complete GSE solutions for new hangar start-ups, MRO's, FBO's, military, and commercial airlines. Our expansive GSE portfolio includes a wide range of manufacturers including Tronair, Eagle Tugs, JetPorter Tugs, Malabar, DAE, Columbus Jacks, Unitron, Start Pac, Tiger Tugs, Dekal Load Banks, Jackson Weight Scales, Aero-Weigh Weight Scales, and much more.
8tree makes portable 3D surface inspection tools that deliver dent-mapping, blend-out, fastener-flushness and panel-alignment results within seconds. 8tree’s dentCHECK tool is approved by Airbus, backed by Boeing & Bombardier, and the choice of the world’s leading airlines/MROs for Line/Base maintenance and AOG tasks. It slashes damage-mapping & reporting times by 90%, delivers unmatched measurement accuracy and SRM-compliant ‘go/no-go’ answers. 1-button operation and complete wire-free handheld portability empower the operator.
Advanced Torque Products (ATP), an ISO9001:2015 certified company, proudly supports the Aerospace Industry with torque tools for both assembly and maintenance. Our line of Digital Torque Multipliers have an industry leading accuracy of +/- 0.4% and +/- 1% of total capacity, are easy to use, durable, and interchangeable. ATP offers an extensive range of torque tools, including custom multiplier adapters & accessories, click-out wrenches, torque verification devices and lifting devices.
AERO Specialties provides complete aircraft ground support equipment (GSE) solutions to corporate, FBO, MRO, military, airline and general aviation customers. AERO manufactures and distributes industrial-grade, high-quality new, used and refurbished aircraft GSE, including Towbars & Heads, Oxygen & Nitrogen Systems, Lavatory & Potable Water Carts, Ground Power Units (GPU), Stairs & Stands, Tractors & Tugs, Hydraulic Service Systems, Ramp Safety Equipment and much more.
AeroSafe Products markets and distributes environmentally friendly aviation chemicals and many other aviation consumable related products. Some of the world's largest aircraft manufacturers, aircraft operators, and FBO's are our customers. AeroSafe Products is the exclusive supplier of Purogene, the globally respected and most recognized onboard water disinfectant chemical product used in the aviation industry. We also have an extensive line of green interior and exterior cleaners, as well as a broad array of sealant and adhesive removers.
AEROSPACE PRECISION, is a leading, worldwide authorized OEM repair and manufacturing facility, offering FAA and EASA certification. We provide component repair and overhaul services for accessories, hydraulics, electro-mechanical, and pneumatic systems and THSA to over 100 airlines worldwide, including wheels and brakes for Boeing, Airbus, Embraer, Bombardier and regional aircraft.
**Presenting new solutions for rapid windshield replacement, automated Pressure Test systems and customizable solutions for composite repair.** For over 20 years, Aerowing has worked with aircraft manufacturers and maintainers to develop our revolutionary processes for aircraft leak detection, sealant removal, and curing of sealants, paints and composites. We help aircraft operators expedite airframe repairs saving hours, and oftentimes days, of ground time. - Boeing Approved - Airbus Approved - ISO 9001:2008
Air France Industries KLM Engineering & Maintenance is a major multi-product MRO (Maintenance, Repair, Overhaul) provider. With a workforce of over 14,000, AFI KLM E&M offers comprehensive technical support for airlines, ranging from engineering and line maintenance to engine overhaul, aero structure and fan thrust reverser support, as well as the management, repair and supply of aircraft components, structured around a powerful logistics network. AFI KLM E&M supports almost 2,000 aircraft operated by 200 major international and domestic airlines.
Atec's Phoenix™ Series turbine engine test facilities are in use by engine OEMs and MRO providers who demand the built-in quality of an AS9100 and ISO certified manufacturer in a low-cost, fully relocatable, acoustically isolated structure. Atec provides all facility systems including engine controls, data acquisition, fuel, start, oil and fire suppression. Atec's other products include engine dress equipment (bellmouths), assembly platforms and stands.
Av-DEC is a technical design and manufacturing company based in Fort Worth, Texas serving customers worldwide. Founded and operated by engineers, Av-DEC is highly focused on corrosion prevention in the aerospace industry.
Av-DEC has products that are currently in use solving a wide variety of corrosion problems with Non-Hazardous Polyurethane based products on commercial and military aircraft.
Specific areas of focus for corrosion prevention:
-Aircraft to Antenna Mating Surfaces
-Aircraft Structural Areas
-Wire Harnesses & Interconnects
Since 1983, Aviation Assurance provides risk management consulting, insurance advice and extensive insurance placement for organizations Worldwide. We pride ourselves in not only specializing in Aviation Insurance but all lines of insurance and providing our customers with the best service possible.
Avtron Aerospace and Testek, LLC are the leading manufacturers and suppliers of Aerospace Test Equipment and Test Facilities for accessories including IDG/CSD/Generator, Fuel (Engine/Airframe), Hydraulic, Electro Mechanical, Lube, Pneumatic; Power Controls (ATE test equipment); APU test cells; load banks; specialty gearboxes; portable testers; test boxes; as well as turnkey installation of test facilities and special systems. Customers will now have the option of Avtron or Testek product solutions, as well as support, including that of legacy AAI/ACL Technologies test equipment.
In 1999, Big Ass Fans introduced industrial fans for dairy barns. Our customers recognized the versatility of our products and began to install them in warehouses, factories, hangars and even churches. With every new application, our engineers set out to design the perfect solution. From the first silent motor technology to fans specifically designed to work with air conditioning or automatically adjust, we’re all about finding new ways to meet customers’ needs. For more information on Big Ass Fans, visit www.BigAssFans.com or call 877-244-3267.
PACKAGE DEVELOPMENT FOR AIRCRAFT COMPONENTS. Bill Thomas Associates Inc. (BTA) provides reusable packaging solutions for the Aerospace sector, working exclusively with Airlines, MRO's and Aerospace OEM's for over 35 years. This multi-decade partnership has resulted in customized, off-the-shelf solutions for protecting aircraft wheels, brakes, oxygen cylinders, main batteries, avionics - for thousands of individual P/N's. Ideas translated into products designed to protect your Components, AND Personnel - while making handling, shipping and storage easier, more efficient, and cost effective.
Cobham is the provider of the high performance and long-life Air Separation Module (ASM) for Boeing 737 Next Generation (NG) (NC1211) and Airbus A320 (NC1217) family commercial airlines. Leveraging a pedigree of more than 35 years of expertise in Military fuel tank inerting, Cobham is now set to helping airlines achieve cost savings thanks to superior technology and design.
CV International is a full-service engineering, design, manufacturing, and on-site installation company supporting custom and production-level maintenance platforms, high-pressure nitrogen generation and servicing equipment. Established in 1981, CV International has developed a large portfolio of platform projects from small access stands to full-wrap/access platforms supporting KC135, C130, B747 (E4), B737, B787, F16 and F35 Aircraft. Our high-pressure nitrogen systems are in use in U.S. military and civilian hangers around the world.
The DAES Group of Companies is a dedicated global aerospace service group — with 15 offices around the world — that provides integrated support by offering a full-service from the consulting and technical accessory to the equipment selection, acquisition, installation, training, and after-sales.
DMC is the leading manufacturer of mil-qualified crimp termination tools, wiring system maintenance kits, and insertion/removal tools. DMC also supplies Backshell Assembly Tools, ALPHATRON Crimp Pull Testers, and SAFE-T-CABLE, the time saving substitute for Safety Wire.
Durable Superior Casters
Durable Casters is a full line caster manufacturer. We are a leading supplier of casters and wheels throughout North, South, and Latin America. With four strategically located facilities in the US (Dallas, LA, Tacoma, and Cincinnati) as well as Guadalajara area in Mexico, Durable has become one of the most reliable and trusted names in the caster industry in terms of quality, availability and competitiveness.
Eaton’s broad portfolio of hydraulic, fuel, motion control and engine solution products delivers safe, reliable and efficient solutions for aircraft, with an emphasis on helping improve operational performance, reduce operating costs, and meet changing safety, emission and fuel economy regulations. Eaton components lead the industry in reliability and can be found on virtually all major commercial and military aircraft platforms.