This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Carolina GSE is a global supplier, distributor, repair facility, and service center of aircraft ground support equipment (GSE). We offer complete GSE solutions for new hangar start-ups, MRO's, FBO's, military, and commercial airlines. Our expansive GSE portfolio includes a wide range of manufacturers including Tronair, Eagle Tugs, JetPorter Tugs, Malabar, DAE, Columbus Jacks, Unitron, Start Pac, Tiger Tugs, Dekal Load Banks, Jackson Weight Scales, Aero-Weigh Weight Scales, and much more.
8tree makes portable 3D surface inspection tools that deliver dent-mapping, blend-out, fastener-flushness and panel-alignment results within seconds. 8tree’s dentCHECK tool is approved by Airbus, backed by Boeing & Bombardier, and the choice of the world’s leading airlines/MROs for Line/Base maintenance and AOG tasks. It slashes damage-mapping & reporting times by 90%, delivers unmatched measurement accuracy and SRM-compliant ‘go/no-go’ answers. 1-button operation and complete wire-free handheld portability empower the operator.
Accudraft Paint Booths has been designing and building top-quality paint finishing systems for over 40 years. As a chosen vendor for the U.S. Air Force, Accudraft is proud of its rich history in aerospace refinishing. Accudraft manufactures innovative refinishing equipment for various industries, allowing for a vast experience in finding the precise solution for your operation. An in-house design and engineering team works with each customer to find a custom solution for their finishing needs at any budget.
AERO Specialties provides complete aircraft ground support equipment (GSE) solutions to corporate, FBO, MRO, military, airline and general aviation customers. AERO manufactures and distributes industrial-grade, high-quality new, used and refurbished aircraft GSE, including Towbars & Heads, Oxygen & Nitrogen Systems, Lavatory & Potable Water Carts, Ground Power Units (GPU), Stairs & Stands, Tractors & Tugs, Hydraulic Service Systems, Ramp Safety Equipment and much more.
ASSA ABLOY Entrance Systems is the world’s most comprehensive supplier of automatic entrance solutions. Our Megadoor brand vertical-lifting fabric hangar doors are designed to meet any size or wind load and are the most energy-efficient hangar doors on the market. Megadoor hangar doors are constructed with solid, heavy-duty, corrosion-resistant components, and operate with a reliable electrical system and sealed motors to prevent dirt and dust infiltration.
Bascon, Inc. is a nationally recognized architectural and engineering design and construction firm specializing in the aviation industry with over two decades of experience. Our professional staff of engineers, architects, and construction managers is committed to satisfying our operational requirements and would welcome the opportunity to serve your aviation facility needs.
In 1999, Big Ass Fans introduced industrial fans for dairy barns. Our customers recognized the versatility of our products and began to install them in warehouses, factories, hangars and even churches. With every new application, our engineers set out to design the perfect solution. From the first silent motor technology to fans specifically designed to work with air conditioning or automatically adjust, we’re all about finding new ways to meet customers’ needs. For more information on Big Ass Fans, visit www.BigAssFans.com or call 877-244-3267.
Champion GSE, an independent, family-owned company head- quartered in Springfield, Ohio, is a global leader in the design, development, testing and manufacturing of Stronghold engine stands, shipping and storage containers, as well as ground support equipment for general and commercial aviation, military, power generation and space programs. Champion GSE's customers rely on their vertically integrated manufacturing and comprehensive engineering capabilities, backed by more than 60 years in the industry.
Clayton is a design and manufacturing firm focused on dust collection solutions for commercial and military aerospace fabricators and maintainers. We work with leading aerospace firms to provide engineering controls which enhance worker safety and ensure compliance with OSHA and environmental regulations.
Cobham is the provider of the high-performance and long-life Air Separation Module (ASM) for Boeing 737 Next Generation (NG) (NC1211) and Airbus A320 (NC1217) family of commercial airlines. Leveraging a pedigree of more than 35 years of expertise in military fuel tank inerting, Cobham is now set to helping airlines achieve cost savings thanks to superior technology and design.
The Colorado Springs Airport (COS) is a city-owned, public, civil-military airport located six miles southeast of the city center of Colorado Springs. Peterson Air Force Base is the largest tenant, co-located on the north end of the airfield.
The DAES Group of Companies is a dedicated global aerospace service group — with 15 offices around the world — that provides integrated support by offering a full-service from the consulting and technical accessory to the equipment selection, acquisition, installation, training, and after-sales.
DELTA H is a U.S. Air Force Veteran and Family Owned and operated manufacturer of Industrial Heat Treating Furnaces and Composite Curing Ovens designed exclusively for the aerospace and defense industries. DELTA H provides confidence to your team's in-house heat treat operations by supplying turn-key systems that meet and exceed the strictest standards of AMS2750E and Nadcap Accreditation requirements--along with a full week of start-up and training services.
F.E. Moran Special Hazard Systems is a heavy industrial fire protection contractor. Since 1979, F.E. Moran has provided turn-key protection and life safety solutions for industrial facilities located nationally and internationally. We have completed over 1,000 projects worldwide. Our in-depth knowledge of standards, design, and skilled installation crews offer the best fire protection service available. We have developed relationships with many of the largest General Contractors to complete new construction and captial projects. In addition, F.E.
FSB is a nationally recognized leader in the programming, planning and design of MRO facilities, Hangars, Support Shops, Flight Simulators, and other aviation related facilities. In recent years FSB has designed in excess of 235 aircraft hangars valued at over $4.0 billion USD. FSB has been designing aviation facilities for 74 years and is a full-service Architectural & Engineering design firm that provides Architectural Design & Production, and Civil, Structural, Mechanical, Plumbing, Fire Protection, Electrical, and Communications Engineering design services.
GSP360 is a land-use program committed to the legacy of carefully considered, responsible, sustainable and environmentally sensitive growth and development. Focused on serving the needs of business partners, tenants and the community, GSP360 will support and fuel continued economic growth and development of the Upstate Region of South Carolina. This group of nine outstanding developable tracts of land has the potential to be developed in their entirety or subdivided into distinct parcels to suit individual tenant needs.
Haggard & Stocking is a privately held distributor of Aerospace MRO supplies, founded in 1972. Based in Indianapolis, we have facilities in fourteen states. Our core competencies include cutting tools, abrasives, tapes, adhesives and PPE. Proven experience in integrated supply, vendor managed inventory, vending & software solutions.
Jewers Doors is the world's leading designer and manufacturer of aircraft hangar doors with sliding, folding and specialist doors from our Esavian range suitable for very many projects. We have completed more than 1,000 projects around the world and our doors are installed on all six continents. Jewers Doors has built more main doors for Boeing 747 and Airbus A380 hangars than any other company. We provide a complete service ï¿½ including design, manufacture, opening preparation, installation with civil works, maintenance, servicing and repair.
Kalitta Maintenance offers quality commercial aircraft MRO services. Heavy maintenance from D-checks and below. MODS, interior, paint, composite, tires, brakes, and battery shops. Powerplant services from overhauls to repairs on most P&W and GE engines, APUs as well.
Legacy Building Solutions has experience manufacturing, designing, selling and installing fabric buildings on rigid steel frames across the globe.
We realized that rigid steel frames, long used in traditional construction, would give fabric buildings greater design flexibility and strength. Based on this experience, we created a now-patented attachment system for integrating fabric cladding with the steel frame, and the rest is Legacy Building Solutions history.