This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
B & W Aviation provides top-of-the-line maintenance for wheels and brakes. We also provide maintenance for your aircraft batteries, and work with top manufacturers to assure you the best quality and efficiency. Furthermore, we offer outright and flat-rate exchange programs tailored to fit your requirements, making us leaders in the industry.
BAE Systems has a history of excellence and innovation in manufacturing high-integrity avionics, flight and engine controls, and a broad range of cabin and flight deck electronics. Embracing an innovation mindset, and leveraging our development and integration expertise, we strive to be the most dependable provider of highly reliable, adaptable, and scalable solutions for the leading manufacturers of air transport, regional, business jet, and aircraft engines.
Barnes Aerospace; a strategic business unit of Barnes Group Inc. (NYSE:B) is a global leader in the manufacture, repair and overhaul of aerospace components. Our Barnes Aerospace OEM manufactures many complex components for the major engine and airframe manufacturers. Barnes Aerospace Aftermarket provides the turbine engine MROs around the world with numerous repair capabilities for components including casings, frames, disks, drums, seals, shafts, and shrouds; many are OEM source approved. We operate 3 MRO facilities located in West Chester, Ohio; East Granby, Connecticut and Singapore.
BASF offers a broad portfolio of products and technologies that can provide unique solutions across a wide range of applications, cabin interiors, structural materials, seating components, fuel and lubricant solutions, coatings & specialty pigments, as well as flame retardants & fire protection.
Bauer is the world-leader in aircraft component test equipment. For the last 102 years, our MRO and OEM customers have benefited from Bauer quality, reliability, and long-term support. Bauer equipment covers testing and support of aircraft Engine and Control Systems, Engine Components, Thermal and Fluid Management Systems, Air Management Systems, Hydraulics, Electric and Mechanical Actuation Systems, Cargo Loading Systems, Wheel & Brake Systems, Auxiliary Power Units, Water and Waste Systems, Oxygen Systems, and Component Overhaul and Repair Tooling.
Benchmark Connector Corporation is a fully Authorized Value-Added distributor for AERO ELECTRIC CONNECTOR, INC., CRISTEK, SPACECRAFT COMPONENTS, SPI-CONNECTS, PRECI-DIP and ELECSYS Division of DCX-CHOL. We custom assemble and package a complete line of AERO/ELECSYS connectors. From MIL-DTL-26482 Series I & II to MIL-DTL-38999 Series I, II, III. With ELECSYS we carry their complete line of FZ, FZH, FC & FCH commercial firewall connectors and Spacecraft Componets AS50151 Solder Connectors.
Berry Global has a long-standing commitment to the Aerospace industry and offers a variety of tapes and industrial wipes products all made here in the USA. Visit us at booth 887 to learn more about: ·Polyken and Patco OEM-specified adhesive tapes for carpet, cargo pit, moisture barrier, masking, and surface protection. ·Chicopee industrial towels engineered for strength and absorption to support your toughest wiping challenges.
PACKAGE DEVELOPMENT FOR AIRCRAFT COMPONENTS. Bill Thomas Associates Inc. (BTA) provides reusable packaging solutions for the Aerospace sector, working exclusively with Airlines, MRO's and Aerospace OEM's for over 35 years. This multi-decade partnership has resulted in customized, off-the-shelf solutions for protecting aircraft wheels, brakes, oxygen cylinders, main batteries, avionics - for thousands of individual P/N's. Ideas translated into products designed to protect your Components, AND Personnel - while making handling, shipping and storage easier, more efficient, and cost effective.
BP Aero is a leading provider of engine disassembly and recently added storage, preservation and lease return services to our portfolio — CFM3/5/7, CF6-80, CF34-8, PW 4000, V2500 & RB211. BP Aero is an FAA/EASA/CAAC 145 Repair Station. BP Aero performs inspect, repair, and overhaul services on a range of CFM56/CF6-80/ CF34-8 & PW4000 components including Tubes, Manifolds, Cases, Housings, Supports, Disks, Seals, Shafts, LLPs, AGB, TGB, IGB, Heat Exchangers, Fuel Accessories, Pneumatic Starters and Lube Pumps. BP Aero is licensed by GE & P&W and Boeing.
For over 6 decades, Bruce Aerospace has designed and manufactured interior cabin lighting, emergency escape path lighting systems, and illuminated signs including exit and passenger information signs for all commercial aircraft. We offer patented full color Mood Lighting as a vibrant, customer-programmable “plug and play” system providing rich colors and illumination levels tailored to suit each airline’s distinctive brand. We specialize in cost-saving retrofit systems and offer full after-market support.
Here at B & B Metalworks our goal is to gain lifetime customers and deliver the highest quality work. We believe that every project should be a masterpiece. It doesn't matter how big or how small, you deserve the attention that we will bring. Whether it be a home or business project we treat each project like it's our own.
We have the ability to offer you a one stop shop with welding, fabricating, powder coating, galvanizing and more!
B & E Precision Aircraft Components is a division of B & E Group, LLC , located at 10 Hudson Drive in Southwick, Massachusetts. B & E was established in 1950 in Westfield, Massachusetts before moving to its present location. We currently employ approximately eighty five people, working two shifts around the clock, which includes a full support staff of Inspection, Engineering and Technical personnel.
B&M FINISHERS INC. was organized in April 1956 by William Bramson & Henry Milne. B&M started operations in a 1200 square foot manufacturing space in a building in Irvington, N. J. By sheer hard work and know-how their business grew. By the autumn of that year, two men were hired and 400 square feet of space were added. In June 1958 their first move was made to a 5000 square foot building in Hillside, N. J., requiring a work force of ten employees.
B&E Aircraft Component Repair is a FAA approved repair station which utilizes its core competencies (Precision Machining & Engineering) to provide development of new repairs (DER’s) for complex aircraft components and assemblies.
B&V Aircraft Parts and Supply is going on 10 years of operation. The company got its start selling an American Airlines consignment of Fokker parts. Based on the strong performance more consignments followed and the company was able to build up a significant inventory of surplus aircraft parts including Embraer, ATR, Fokker, Boeing and Airbus.
In the last several years the company expanded it geographical footprint to Europe and Russia, and expansion to Asia is planned, all to continue to allow B&V to provide excellent service to our global operating client base.
Britten-Norman, the UK’s only independent civil aircraft manufacturer, has been producing aircraft continuously for a period spanning six decades. In addition to manufacturing and supporting the BN2 series of Islander, Trislander and Defender aircraft, the Company is also a defence contractor specialising in the integration, installation, test and trials of mission equipment.
B.A.S. Inc. aircraft modifications include the BAS Inertia Reel 4 Point Shoulder Harness/Lap Belt System designed as a retrofit assembly to replace factory aircraft seatbelts. Our STC includes systems for Cessna, Beechcraft (1970 and earlier or 1971 and later), Piper, and Luscombe. BAS Inc. also sells other products.
Our Vision at B.C. Instruments is to be recognized as the supplier of choice for precision machining solutions by our selected customers and as the employer of choice for those who embrace a culture of lifelong learning and a relentless drive to improve
B.I.C. Carpets is internationally renowned for creating refined, high quality carpets in the world of custom Wilton weaving. Our carpets have been rewarded with numerous prizes for their outstanding creativity, innovation and know how.
Since its foundation in 1956, B.I.C. carpets provides a tailored, individual service and offers quality, flexibility and top value for its customers worldwide. Our carpets can be found all around the globe, from embassies, hotels, executive offices and luxury yachts, to the most exclusive residences.