This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Click Bond designs and manufactures fasteners optimized for adhesive attachment to structure including rivetless nutplates, studs, sleeves for hole repair/protection, and more. Click Bond adhesive-bonded fasteners incorporate a unique installation fixture that promotes accurate positioning and maintains consistent clamp-up of the bondline during the adhesive cure, ensuring a strong bond. The adhesive provides a non-metallic barrier between the structure and the fastener, lowering the potential for galvanic corrosion.
Cobalt Aero Services is an FAA/EASA Repair Station focused on the repair and overhaul of Thrust Reversers, Nacelle Cowlings, Flight Control Panels and other Airframe Structures such as Fairings, Landing Gear Doors, Etc. Cobalt's size and experienced technicians offer quick and nimble service to respond to our client's urgent requirements and Cobalt's leadership has the technical familiarity and depth of experience to handle difficult or unique repair scenarios. If you need a BER'd component made serviceable, or an AOG component repaired quick - turn to Cobalt for your solution.
Cobham is the provider of the high-performance and long-life Air Separation Module (ASM) for Boeing 737 Next Generation (NG) (NC1211) and Airbus A320 (NC1217) family of commercial airlines. Leveraging a pedigree of more than 35 years of expertise in military fuel tank inerting, Cobham is now set to helping airlines achieve cost savings thanks to superior technology and design.
Collins Aerospace, a unit of United Technologies Corp. (NYSE: UTX), is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Created in 2018 by bringing together UTC Aerospace Systems and Rockwell Collins, Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market.
Colonial Coatings provides over 200 years of combined experience in the coatings industry. We serve most prime aerospace contractors and the commercial sector as a trusted applicator for OEM parts and overhaul repair work. Our services include Magnesium anodize, surface sealants, paints (+ MIL spec), lubes, thermal plasma spray and sacrificial high-temperature coatings.
We are ITAR and NADCAP certified and an FAA/EASA repair station. We offer superior quality and better-than-industry-standard turn times.
Columbia Manufacturing is proud to supply critical assemblies, fabricated components and MRO services to the world’s major turbine engine manufacturers, commercial airlines, industrial power companies, military operations, and related industries. Columbia Manufacturing’s facility encompasses over 100,000 square feet with dedicated process areas for OEM and MRO services. We have many in-house processes such as CNC machining, welding, heat treating, brazing, FPI, and sheet metal forming.
Commercial Jet is an Industry Leading Turn-key Provider of Aircraft Maintenance, Repair and Overhaul (MRO) Services for Commercial and Military Aircraft. Commercial Jet specializes in line and heavy maintenance and modification services, Aircraft painting, complete airframe inspections, freighter conversions, interior modifications and avionics upgrade programs.
Continental Aircraft Support: Component repair center with instrument class I, II, II, and IV and accessory class II and III. FAA, EASA, and ISO 9001:2008 certified operating out of our main 25,000 sq ft facility in Miami Lakes, Florida. Our extensive capability includes: Starters, Actuators, Generators, Fans, Motors, Pneumatic Accessories, and Electrical Components. Galley equipment capabilities includes: Coffee Makers, Ovens, Boilers, Water Heaters, and Water Tanks. Our Instrument and Gyro Shop is comprehensive and supports a large number of cockpit instrumentation.
Coopesa RL: we are a FAA & EASA certified airframe MRO proud of our 55 years history of delivering: high quality workmanship, on time delivery, outstanding record of safety, and a focus on clients’ cost reduction. We specialize on the A-320FAM, B737series, Embraer-190 and B757 aircraft, serving the leading airlines in the Americas and global leasing companies. Based in Costa Rica, a free zone with the highest levels of education and stability in Central America.
Crane Aerospace & Electronics delivers innovative systems, components, and services for commercial aircraft, defense platforms and space systems which have proven reliability in mission-critical environments. Products and services are organized into six integrated solutions: Cabin Systems, Electrical Power Solutions, Fluid Management Solutions, Landing Systems, Microwave Solutions, and Sensing Components & Systems. For more information, visit www.craneae.com.
Located in Reno, Nevada, Cross-Check Aviation has been serving the commercial airline and air cargo industry since 1999. We are an FAA/ EASA/AS9110 certified award winning repair station specializing in Instruments, Accessories, and Radio equipment for most major aircraft. A Number One Lufthansa supplier and winner of OneAero's 2015 Top Shop for Avionics and Instruments, consistent quality, personalized service, and fast TATs are what set Cross-Check Aviation apart.
The DAES Group of Companies is a dedicated global aerospace service group — with 15 offices around the world — that provides integrated support by offering a full-service from the consulting and technical accessory to the equipment selection, acquisition, installation, training, and after-sales.
Dallas Centerline overhauls and assembles all types of wheel and brake assemblies. With more than 30 years of experience in the wheel and brake industry, we have the ability and knowledge to service virtually any aircraft. We offer quick turnaround times, with an acute attention to detail.
We embrace being a repair station. We do our best to help our customers get the most out of their aircraft components, while maintaining our impeccable quality and safety standards.
DASI is a leading global aircraft inventory solutions provider.
For over 25 years, we’ve been in the business of providing comprehensive aircraft inventory support for airlines, MROs, OEMs, and distributors. Headquartered in Miami, Florida, with service centers in London and Singapore, DASI is a truly global partner, serving customers’ parts and inventory needs in more than 140 countries.
Davinci Aerospace is a Service Disabled Veteran Owned Small Business focusing on the Defense Market. We provide Business Development & Program Management services for companies looking to add capability with the Government. We also provide Engineering & DER Services and Repair & Manufacturing. Our Part 145 Repair Station capabilities focus on both military and commercial parts that include Structural (both Composite & Metal) and Galley equipment. Our turning center focuses on Bushings, Sleeves, Shims & similar products.
For over 55 years our company has been providing expert aircraft refinishing services to the aviation industry. The experienced staff of over 350 professionals, operating from four locations, provide a broad range of services including, full strip and paint, flight control balancing, minor maintenance and Custom Liveries for VIP, Airline and Military customers.
DELTA H is a U.S. Air Force Veteran and Family Owned and operated manufacturer of Industrial Heat Treating Furnaces and Composite Curing Ovens designed exclusively for the aerospace and defense industries. DELTA H provides confidence to your team's in-house heat treat operations by supplying turn-key systems that meet and exceed the strictest standards of AMS2750E and Nadcap Accreditation requirements--along with a full week of start-up and training services.
Delta TechOps is the largest airline maintenance, repair and overhaul provider in North America. In addition to supplying maintenance and engineering support for Delta’s fleet of more than 850 aircraft, Delta TechOps serves more than 150 other aviation and airline customers around the world. The organization specializes in high-skill work such as engines, components, hangar and line maintenance. Delta TechOps employs more than 10,000 maintenance professionals and is one of the world’s most-experienced providers with more than 90 years of aviation experience.
For 40 years, Derco, A Lockheed Martin Company, has provided full military logistics and technical support for fixed-wing aircraft. They offer an industry-leading suite of fleet management solutions, including spares distribution, logistics solutions, repair and overhaul services, and technical solutions. Derco supports global military efforts in over 65 countries and maintains one of the largest and diversified aircraft spares inventories in the world including more than 60,000 unique parts in stock.
Desser Tire & Rubber Company,LLC., is a full service provider for AC tires, wheels and brakes for corporate to jet transport aircraft. We are the only distributor to have all major tire lines, including Dunlop, Goodyear, Michelin, Condor, Specialty Tires, and Aero Classic. Our repair station, Aero Wheel and Brake,(CRS U8SR971J) retreads AC tires up to 225MPH rating, and provides wheel and brake minor services and complete repair and overhaul on most business and large jet transport fleets. We have blended retread tire programs for many fleet sizes.