This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Global Airservices has been serving the aviation industry since 2011 for repair and overhaul of commercial and regional aircraft components. We are an FAA, EASA, & DGCA Indonesia certified repair station located in Miami, Fla. In our 12,500 sq. ft. state-of-the-art facility, we offer unsurpassed quality and reliability in all types of repairs/overhauls for aircraft components. Global capabilities include power geneartion, hydraulic, pneumatic, electrical accessories for Boeing legacy series, new generation and Airbus.
Located in the world's third largest aerospace city, Avianor Inc. is a privately held Canadian corporation that specializes in aircraft and component maintenance (Airframe MRO, seats, Interiors), manufacturing (crew seats and cabin interior items) and interior cabin modifications. Founded in 1995, the company has 20 years of expertise in the design, engineering, certification, manufacturing, maintenance, modification and distribution of aeronautical equipment. Avianor has positioned itself as a vertical integrator in the marketplace.
Aviatechnik Corporation is a TCCA, EASA and ANAC approved landing gear MRO and Bombardier Aerospace approved maintenance supplier. We specialize in landing gear repair/overhaul, lease and exchange services for regional and business aircraft, including CRJ100/200/700/900/1000, DASH-8 100/200/300/Q400, ATR 42/72, Challenger 300/600/601/604/605/850, Global Express/5000, ERJ135/145 (Legacy 600/650), Falcon 10/20/100/200/50/900/2000 and Fokker 70/100, as well as repair/overhaul of hydraulic, mechanical, pneumatic and electrical components.
Since 1983, Aviation Assurance provides risk management consulting, insurance advice and extensive insurance placement for organizations Worldwide. We pride ourselves in not only specializing in Aviation Insurance but all lines of insurance and providing our customers with the best service possible.
Aviation Fuel Systems Repair, Inc. is an FAA approved repair station, with two locations; Ontario, CA “QFRR548K” and at the Los Angeles airport “QFRD548K.” Specializing in aircraft fuel leak detection, repair, and fuel cell recertification, Our maintenance covers a multitude of aircraft types and numerous years of aviation familiarity. Supervisors average more than 10 years of aircraft fuel systems maintenance covering commercial, military and corporate aircraft.
Aviation Plus, Inc., founded in 1986, is an aircraft instrument, avionics and accessory repair facility located in Miami, Florida. We are FAA/EASA approved in classes I, II, III & IV Instrument Repair, Accessory Class III and Limited Radio. Our overhaul and repair capabilities cover commercial, military, helicopter, air transport, commuter and corporate aircraft. We specialize in all flight and engine indicators including remote gyros as well as accessories including search lights, static inverters, voltage regulators and blower motors.
GTCP331, GTCP85, GTCP36, GTCP131 APU, LRU and Piece Part overhauls/repairs, TPE331, P & W PT6 and JT15D piece part overhauls. We have our own computerized test cell, LRU benches and full line machine shop. We perform all the work in our own facility.
Our craftsmen perform piece part repairs and repair management services using in-house chrome plating, precision grinding, and NDT processes. Managed services include nickel and cadmium plating and thermal spray. Our experience includes thousands of parts from all aerospace metals, but we have unique capabilities to plate chrome on aluminum, inconel, and titanium. We are FAA/EASA and AS-9100 certified and use a consulting FAA DER. Customers include OEMs, airlines, and Part 145 Repair Stations for commercial and military transport, business jet, turboprop, and helicopter platforms.
Aviatron is an Air Cycle Machine specialist. Capabilities also include Overhaul/Repair of Air Starters, Pneumatic Valves, Power Generation Components and Generator Control Units. Offering an in-house Engineering service and an active DER and PMA development program currently delivering proven reliability and substantial operational cost savings. FAA and EASA certified repair station.
We are one of the largest dedicated avionics repair facilities in North America. Our staff consists of 51 technicians that are fully qualified and trained with an average experience of 16 years. We have capabilities on over 20,000 items, with new ones continually being added to accommodate emerging technologies. Our capabilities range from corporate and regional operations, to airlines and military air forces worldwide. We service general aviation through ARINC 700/900.
BAE Systems has a history of excellence and innovation in manufacturing high-integrity avionics, flight and engine controls, and a broad range of cabin and flight deck electronics. Embracing an innovation mindset, and leveraging our development and integration expertise, we strive to be the most dependable provider of highly reliable, adaptable, and scalable solutions for the leading manufacturers of air transport, regional, business jet, and aircraft engines.
Barnes Aerospace Aftermarket, a business unit of Barnes Group Inc. is a global leader in the repair and overhaul of turbine engine components including casings, disks, drums, seals, shafts, and shrouds. With facilities located in Ohio, Singapore and Connecticut, Barnes provides the engine MROs of the world with numerous repairs, including source approved. Barnes maintains its leadership position by continuously investing in new repairs and processes to meet the challenging needs of the MRO industry.
Bauer is the world-leader in aircraft component test equipment. For the last 102 years, our MRO and OEM customers have benefited from Bauer quality, reliability, and long-term support. Bauer equipment covers testing and support of aircraft Engine and Control Systems, Engine Components, Thermal and Fluid Management Systems, Air Management Systems, Hydraulics, Electric and Mechanical Actuation Systems, Cargo Loading Systems, Wheel & Brake Systems, Auxiliary Power Units, Water and Waste Systems, Oxygen Systems, and Component Overhaul and Repair Tooling.
Benchmark Connector Corporation is a fully Authorized Value-Added distributor for Aero-Electric Connector, Inc., Cristek, Spacecraft Components, SPI-Connects, PRECI-DIP and Elecsys Division of DCX-CHOL. We custom assemble and package a complete line of Aero/Elecsys connectors. From MIL-DTL-26482 Series I & II to MIL-DTL-38999 Series I, II, III. With Elecsys, we carry their complete line of FZ, FZH, FC & FCH commercial firewall connectors and Spacecraft Components AS50151 Solder Connectors.
Berry Global has a long-standing commitment to the aerospace industry and offers a variety of tapes and industrial wipes products all made here in the USA. Visit us at booth 1852 to learn more about Polyken and Patco OEM-specified adhesive tapes for carpet, cargo pit, moisture barrier, masking, and surface protection. Then, talk to our team about Chicopee industrial towels engineered for strength and absorption to support your toughest wiping challenges.
Bonus Tech, Inc. is an AFRA certified facility that specializes in engine disassembly. It is a joint venture with AFI KLM E&M and operates as part of the MRO’s global network. Bonus Tech is specialized in any disassembly’s for Repair Station, Parts distributors, Airlines and Investors. Bonus Tech service includes disassemble, parts identification, parts trace and full packing. Best known for short lead times, competitive prices, and helping customers to reduce overall costs.
BP Aero is a leading provider of engine disassembly and recently added storage, preservation and lease return services to our portfolio — CFM3/5/7, CF6-80, CF34-8, PW 4000, V2500 & RB211. BP Aero is an FAA/EASA/CAAC 145 Repair Station. BP Aero performs inspect, repair, and overhaul services on a range of CFM56/CF6-80/ CF34-8 & PW4000 components including Tubes, Manifolds, Cases, Housings, Supports, Disks, Seals, Shafts, LLPs, AGB, TGB, IGB, Heat Exchangers, Fuel Accessories, Pneumatic Starters and Lube Pumps. BP Aero is licensed by GE & P&W and Boeing.
For over six decades, Bruce Aerospace has designed and manufactured interior cabin lighting, emergency escape path lighting systems, and illuminated signs, including exit and passenger information signs, for all commercial aircraft. We offer patented full-color mood lighting as a vibrant, customer-programmable “plug and play” system, providing rich colors and illumination levels tailored to suit each airline’s distinctive brand. We specialize in cost-saving retrofit systems and offer full after-market support.